Stone engraving machine engraving embossed glass tips

With the advent of CNC engraving machines, the demand for reliefs has been increasing day by day. In addition to wood reliefs and stone carvings, the demand for glass reliefs and glass screens is even more urgent. In contrast, glass sculptures are a symbol of identity and a symbol of elegance. Things are rare, and glass carvings are more difficult to make than wood carvings and stone carvings. Because glass carving is easier to break. It is also difficult to guarantee the engraving of a general CNC glass engraving machine without any damage. Here is Shandong Baodian Electronic Technology Co., Ltd. to explain the skills of stone engraving machine on the glass:

1. Glass is fragile, so be sure to pay attention when fixing the glass. It is best to put a thin layer of wood or PVC board under the platen.

2, after the preparation work, start the knife, must pay attention to the spindle before rotating the knife, quickly contact the glass surface, use fine adjustment, each time the knife is controlled below 0.1 mm.

3, on the Z direction to find the origin of the problem, it is best to move the tool to the middle of the whole glass, in this position to determine the Z to the origin, the engraving depth is more uniform.

4. After the engraving is completed, the glass crumbs on the surface of the stone engraving machine should be cleaned in time, and washed with water, so as not to accidentally puncture the hand.

Tag:Engraving machine Stone engraving machine Wood engraving machine Cylindrical engraving machine