What is the power of the advertising laser engraving machine?

There are many powers for advertising laser engraving machines. The low power is between 80W and 200W, and the high power is generally more than 700W.

How much is the power of the advertising laser engraving machine?

1. The advertising laser engraving machine between 80W and 200W is suitable for relatively fine small processing, and can be processed like a badge, small crafts and acrylic surface.

2, 700W or more advertising laser engraving machine is mainly used for engraving of large materials, such as crystal characters, billboards, stone processing, can be carved on 30mm thick hard materials.
What is the power of the advertising laser engraving machine?

1, advertising laser engraving machine between 80W ~ 200W, although the object is not very large, but the characteristics are more refined than the high-power machine, and does not occupy the volume.

2, more than 700W advertising laser engraving machine in the processing of small pieces of accuracy slightly less than 80W ~ 200W advertising laser engraving machine, and the price is slightly more expensive.

How much is the power of advertising laser engraving machine?

According to the application requirements of the industry, it is necessary to customize the appropriate advertising laser engraving machine. If you need to process large blocks of materials and purchase a relatively inexpensive low-power advertising laser engraving machine, you may not be able to complete the processing requirements. This is especially important.

How big is the power of the advertising laser engraving machine?

The power of the advertising laser engraving machine is clearly stated in the manual.

What is the acrylic power of the advertising laser engraving machine? Consider several aspects

1, the cutting thickness is best to choose high power, such as more than one hundred, one is power enough, fast.

2, if it is done by cutting and carving, but the cut is not very thick, it is recommended to use 80W.

3, if the main carving, generally cut very thin, it is recommended to match 60W has been placed. According to your own choice, there is no omnipotent, only the primary and secondary.
What should I do if the advertising laser engraving machine does not go up?

1. First check whether the laser tube output mirror is covered by dust. Whether the mirror and the focusing mirror on the laser cutting machine are contaminated, and whether the optical path adjustment is deviated, because these will cause photon loss to the output and reflection of the laser light. The more the laser's high-density photons are lost, the smaller the energy power to reach the material being cut. Once the above situation is found, it can be wiped with 99.7% anhydrous alcohol.

2, the second laser tube in the usual production operation, it is recommended to open the power to account for 80% is most suitable, especially for new pipes, if the current exceeds 10% of the allowable current during inspection work, work in this state for a long time. Will power drop quickly. The working gas in the laser tube will be quickly consumed. The maximum power of the laser tube is actually higher than the rated power of the laser tube. When the gas in the laser tube is consumed a lot, it is not easy to rise to the normal rated power, and the life of the laser tube is greatly shortened.

Secondly, the power of the laser tube is related to the gas temperature. When the gas temperature is too low, the laser tube will not be excited. When the temperature is too high, the decomposition of carbon dioxide will be caused, which will affect the molecular excitation in the laser tube and affect the laser tube. Output.

3. After eliminating the above conditions, check whether the color of the illuminating wire in the discharge tube is normal. If the color is blue or purple, or the color of whitish color is not normal, it is only for reference. I hope to do my best to solve the problem for you.