Zhongke Machinery Equipment Co., Ltd., which specializes in producing all kinds of carving machines, reminds users of the carving machine to pay attention to the following:
1. It is forbidden to use a power supply that does not meet the extra voltage.
2. Strictly operate in accordance with the training requirements of the company, the processing scale shall not exceed the scale specified in the instructions of the carving machine.
3, the carving machine prohibits super strength, overload work!
4. After 1224 or more of the screw-saw carving machine, the loading gantry must be parked in the middle position to avoid the natural sag of the lead screw affecting the concentricity and precision of the machine.
5, if the machine presents smoke, announce abnormalities, noise and other abnormal conditions, please do not use
6, forbidden to wear gloves.
7. Do not use corrosive liquids to clean the engraved machine parts and keyboard.
8. According to different carving materials and carving depth, select the appropriate tool and set the appropriate feeding speed.
9. The spindle should be turned before the Z-axis positioning and the engraving output of the good tool.
10, no damage or random replacement of the original power cord, do not exercise excessive twists and turns of the power cord, strong pull, binding and pressing under heavy objects.
11. Do not touch the tool and the main part with your hands during the operation of the machine.
12, the machine can not enter the liquid, drop into the metal objects, etc., each time after the completion of the carving, the machine should be removed in time to remove the cuttings and dust, and regularly lubricate the screw bar and the rack.
13. When the carving machine is working, the bucket of the water pump should be covered to prevent the debris from falling into the water and blocking the water pipe and the main shaft.
14. When the water-cooled spindle motor is working, it is necessary to ensure that the water pipe is firmly fixed, the water source is clean, and the water flow is dredged. Otherwise, the motor is damaged due to water leakage or water cut, and the water pipe should be replaced after aging. The coolant can be emulsion or 10# mechanical oil.
15. Before starting the machine, start the spindle motor and check whether its rotation direction is rotating. If the rotation direction is wrong, turn off the power supply and swap the orientation of the two wires on the UVW line column on the inverter. The motor is prohibited from rotating. .
