Factors affecting the surface quality of woodworking engraving machine: As the grinding speed increases, the height of the grinding surface roughness decreases, the workpiece feed speed increases, the unevenness of the machined surface decreases, the surface roughness decreases, and the abrasive The larger the particle size number, the smaller the grinding surface roughness, the greater the grinding pressure, the greater the grinding depth, and the lower the quality of the grinding surface.
Woodworking engraving tools cause wood fluffing to be affected by many factors, such as the viewpoint of the blade; the angle of the blade; the accuracy of the spindle; the wear of the bearing; the stability of the workpiece feeding, can you think about the big face or the feeding? And so on. However, in general, most of them are made by the cutting edge of the carpenter's tool and the cutting amount is too large. The low-density middle of most wood-based panels is the high-risk section of burrs. Using the right tools to set the optimal parameters of the carpenter's machinery and equipment, the normal protection of the equipment and tools is the guarantee of the lubricated appearance of the wood cutting.
