Stone engraving machine lubrication method

The part of the stone engraving machine that needs lubrication is xyz three-axis screw. Light bar. It is necessary to use a mixture of oil and butter to make lubricating oil, which is not easy to be too thick. Before the stone engraving machine is lubricated, the lead screw and the bearing on the guide rail are inside. The impurities are removed. If it can't be removed, it can be cleaned with gasoline. After the oil is injected, it will gradually increase the speed and go empty, that is, without the plate, the three-axis running-in.

Y-axis: Lubrication is relatively simple, the guide rails on both sides are easier to clean, and the bottom screw can also enter the oil from the bracket, so it is easier to maintain.

The X-axis needs to be removed from the front and rear screws, and a shield is lifted. (Note: the line on the left side of the side panel should be loosened and then lifted.) The right side is completely lifted. The mixed oil is injected into the guide rail, the lead screw, and the bearing and the right side. The thrust bearing of the screw head.

At the Z axis, the shroud, the lead screw, the guide rail, and the thrust bearing at the bottom of the bearing are opened at a glance. The work done at this time is: lubrication of the mixed oil in the up and down operation.

When the three shafts are lubricated, the inner hexagonal screws on the coupling between the motor shaft and the screw head can be tightened by the inner hexagonal wrench to prevent the three shafts from being misaligned due to the looseness of the mechanical parts. The cycle of the stone engraving machine lubrication Depending on the working environment and machine working time, it is generally cleaned up after work every day. Every month, all parts are refueled and lubricated at high speed.

The essentials of the machine tool for stone engraving machine

    The purchase of stone engraving machine is a problem that many stone carvings are very concerned about. After all, if you want to do something good, you must first sharpen its tools. If there is no good engraving machine, the carved stone carving effect will be worse. Many manufacturers, when purchasing the engraving machine, focus on the engraving machine's engraving knife and engine. These components are important, but the engraving machine, especially the stone engraving machine, is also very close. If you buy a bad extra bed, the engraving machine's carving knife and engine are no better, the carved works will not be very good.
    The machine that purchases engraving machines, especially the machine tools of stone engraving machines, must first pay attention to stability. Because of this engraving machine, stones are placed on the machine when engraving, and when the stability of the machine is not good enough, once the engraving starts, the machine will shake, and the position of the engraving will be wrong. Therefore, we must buy an engraving machine designed by the stone engraving machine manufacturer to stabilize the structure of the machine.
    In addition to stability, the machine tool of the engraving machine must be firm. The stone on the machine tool is to be fixed, and whether the stone can be firmly fixed is also the key to the purchase of the engraving machine. In order to be able to firmly fix the stone, when carving, the stone will not be separated from its original fixed position, so that the carving can be carried out more perfectly.
The essentials of the machine tool for stone engraving machine

    The purchase of stone engraving machine is a problem that many stone carvings are very concerned about. After all, if you want to do something good, you must first sharpen its tools. If there is no good engraving machine, the carved stone carving effect will be worse. Many manufacturers, when purchasing the engraving machine, focus on the engraving machine's engraving knife and engine. These components are important, but the engraving machine, especially the stone engraving machine, is also very close. If you buy a bad extra bed, the engraving machine's carving knife and engine are no better, the carved works will not be very good.
    The machine that purchases engraving machines, especially the machine tools of stone engraving machines, must first pay attention to stability. Because of this engraving machine, stones are placed on the machine when engraving, and when the stability of the machine is not good enough, once the engraving starts, the machine will shake, and the position of the engraving will be wrong. Therefore, we must buy an engraving machine designed by the stone engraving machine manufacturer to stabilize the structure of the machine.
    In addition to stability, the machine tool of the engraving machine must be firm. The stone on the machine tool is to be fixed, and whether the stone can be firmly fixed is also the key to the purchase of the engraving machine. In order to be able to firmly fix the stone, when carving, the stone will not be separated from its original fixed position, so that the carving can be carried out more perfectly.