What should I do if the laser engraving machine is not clear?

Cause 1: The focal length is not accurate.

Solution: Refocus.

Cause 2: The laser system is dirty.

Solution: Clean all optical components, rails, bearings and belts.

Reason 3: The material is not horizontal or inconsistent in thickness.

Solution: Check the focal length at different locations and use more consistent material.

Reason 4: The platform is not level.

Solution: Use the focus tool to measure the focal length at the four corners of the platform. The height difference of the platform should be within +/- 0.20 inches. Adjust if necessary.

Cause 5: The laser beam is not centered.

Solution: Check to adjust the laser beam alignment.

Cause 6: The direction of the tapered part of the air booster is deviated (model with air booster).

Solution: Check and adjust the orientation of this part accurately.

Cause 7: The laser tube is not working properly.

Solution: Replace the laser tube.

Laser engraving machine engraving small words and unclear problems and solutions are known, we say the laser engraving machine to engrave small steps?

Laser engraving machine engraving small words requires sharp corner compensation in the software. For example, in Wentai Engraving Software:

1. Click “Cartographic Output” to pop up the output screen.

2. Click “Settings” to pop up the drawing machine setting screen;

3. Click “Compensation Settings” to pop up a dialog box.

4. Select “Sharp Angle Compensation” and adjust the required value to achieve the desired result.