The previous article has already talked about the problems that are likely to occur in the woodworking engraving machine in the summer and some places that need to be paid attention to during maintenance. In the winter season, how should the woodworking engraving machine be maintained in the opposite season of summer? What are the problems that are likely to occur in summer and winter engraving machines? What are the reasons for the troubles that are likely to occur in the summer? Next, follow the CNC network Xiaobian to understand the winter maintenance of woodworking engraving machine. What about the woodworking engraving machine in winter?
Machine cleaning
1. After the work is finished, the countertop should be cleaned in time, which will provide convenience for the next work.
2. Clean the material scraps along the guide rails and guide rails to prevent the machine from appearing during the work due to debris interference.
3. Regularly clean the lead screw to prevent foreign matter from sticking on the lead screw. The lead screw is very important in the equipment. He determines the precision of the machine, and the screw also plays an important role in the transmission process.
4, regularly clean the industrial control box, the biggest killer of the circuit board when dust.
1. First clean the guide rails and the screw. Use the cloth (no hair removal) bar and the oil and material scraps on the screw to clean it off. Due to the low temperature, both the guide rail and the lead screw can be added with oil. It is best to add antifreeze oil.
2. The refueling cycle is twice a month, that is, every two weeks.
3. If the machine is not used for a long time, it should be refueled regularly to ensure the flexibility of the transmission system.
4. After the oil is added, move slowly back and forth to ensure that the lubricant can be evenly applied to the guide rail and the lead screw.
Working environment temperature
1, to ensure the operating room temperature, preferably to reach room temperature, at least the staff will not be very cold.
2. Check the applicable temperature of the fueling standard and reach at least the minimum temperature.
3. When the machine is not in use, if the room temperature is low, it is best to pour out the water in the water tank to prevent freezing of the water tank and the water pipe.
Cooling water
1. Cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is dirty, it will cause serious damage to the motor, ensure the cleaning of the cooling water and the normal operation of the pump.
2, pay attention to the water level, must not make the water-cooled spindle motor water shortage, so that the motor heat can not be exported in time.
3, pay attention to the ambient temperature, be careful because the water temperature is too cold and cause the water tank and water pipe to freeze.
4. Conditional antifreeze can be used for cooling.
Computer aspect
1. Clean the dust of the chassis regularly, pay attention to the heat dissipation of the chassis, and be careful that the industrial control card is faulty due to excessive dust.
2. Regularly defragment the disk and optimize the computer system.
3, regularly check and kill the virus, but pay attention to work can not open the degree of anti-virus, careful interference.
The above is the winter maintenance of woodworking engraving machine. The detailed answer to the woodworking engraving machine in winter.
