Micromech bearings can be used with shafts up to 12 mm in diameter

Micromech offers Spyraflo seated bearings for shafts smaller than 12 mm in medical, pharmaceutical, scientific and general purpose precision equipment.
       The PB series is said to be the first miniature ball bearing in the industry for small shafts.

       These high-efficiency, cost-saving miniature ball bearings designed for a wide range of instruments are designed for precision installations, eliminating the need for design, production and installation.

       At the beginning, this product was mainly of non-aligned type, as the product is mainly used in more sophisticated fields.

       Because these miniature double-sealed ball bearings require lifetime lubrication, they can only be matched to shafts up to 4 to 10 mm in diameter.

       This kind of miniature ball bearing has aluminum bearing housing body, stainless steel material and double sealing characteristics, which makes the product have certain corrosion resistance, which is the best choice in food and cleaning field.

For more information and purchase please visit: https://www.supplyforever.com

Detailed explanation: Simple cleaning and refueling method for textile sealed bearings

     New cotton spinning equipment uses a large number of sealed bearings due to dust, heat and high speed requirements. After a certain period of operation of these bearings, the bearings are dry and damaged due to lack of oil inside. For example, the imported air-sea spinning machine has a large number of sealed bearings, and the material is good. However, after several years of use, the grease can not be cleaned and replenished, which causes a large number of sealed bearings to be scrapped, which increases equipment failure and unnecessary expenses.

Two simple and effective cleaning and refueling methods are introduced. The first type of sleeve cleaning and refueling method is suitable for sealed bearings with gaps at both ends of the bearing housing. The method is to first soak the bearing in the kerosene for 1 h to 2 h, and then make a special sleeve according to the outer diameter of the bearing, which can both clean and refuel. The inner diameter of the sleeve is slightly larger than the outer diameter of the bearing from 0.05 mm to 0.08 mm, which is slightly shallower than the bearing. Cleaning and refueling step: add appropriate amount of kerosene into the sleeve, press the bearing into the hand, use the gap of the bearing itself, squeeze the kerosene out, repeat 1 or 2 times; clean and drip before adding the required grease to the sleeve The bearing is placed in the sleeve and gently pressed with a pressure gauge. The bearing oil is flexibly controlled according to the demand. The second type is suitable for special fully enclosed bearings with a gap at one end and a set screw hole. Use the positioning screw hole to communicate with the bearing clearance, first soak the bearing in kerosene for 1 h to 2 h, inhale the kerosene with a special nozzle and oil gun, repeatedly drive the bearing 2 to 3 times, and then use the oil gun to lubricate the required lubrication. Add the fat to it.

For more information and purchase please visit: https://www.supplyforever.com