CNC woodworking engraving machine tool dislocation processing method

      The problem of CNC woodworking engraving machine tool itself: a certain part of the machine tool has problems or looseness, and there are impurities in the appearance, etc.; the CNC woodworking engraving machine manufacturers find that the coupling is loose and broken, and will be misaligned; If the screw is not cleaned for a long time, it will also be misplaced; if the machine tool line of the CNC woodworking machine is broken, it will also be misplaced. CNC woodworking engraving machine manufacturers found that each part of the connection control line is in poor contact (control line transmission line). Solution: Remove all connections and reinstall.


      CNC woodworking engraving machine manufacturers tailor-made production of CNC engraving machine, laser engraving machine, wood engraving machine, stone engraving machine, advertising engraving machine, mold engraving machine, three-dimensional engraving machine and other equipment. CNC woodworking engraving machine is an important production tool for wood processing, and production capacity is very important. CNC woodworking engraving machine will present various misalignment problems during the carving process, such as left and right misalignment, up and down dislocation, x-axis dislocation, z-axis dislocation, etc. What is the reason for the Zhengzhou woodworking engraving machine to be misplaced?


      The problem of the CNC woodworking engraving machine driver: the layout inside the drive itself or the problem of the electronic original equipment will also form a misalignment phenomenon, this reason is the most; if the number of renderings is not much, and the speed is reduced a little, sometimes it can be carved normally, which indicates the driver It hasn't completely broken yet; if it is scratched at the beginning, it means the drive is completely broken. Solution: Repair the drive or replace the drive.


      CNC woodworking engraving machine manufacturers view the correct way of carving software; CNC woodworking engraving machine manufacturers to see the gap between the CNC woodworking engraving machine screw and the tightening screw of the polished rod; check whether the software parameters are set correctly; view the ground wire Is it connected?


      CNC woodworking engraving machine manufacturers computer is not a virus or may not be compatible with other interference, usually advocate no need to brand machine, simply assemble the chassis; water-cooled spindle motor front upper coupling is not loose damage, you can view the hand tighten or replace;


      Is there any contact failure in the line of the CNC woodworking engraving machine to the machine control box? The voltage problem: the CNC wood engraving machine requires a large amount of power during operation. If the voltage is too low, the power supply to the driver is lacking, and the power is not up. When it is reached, it will form a dislocation phenomenon. This situation is usually caused by the y-axis misalignment. This phenomenon may be caused by the external voltage, and some people may use high-power equipment such as electric welding on the same line. Solution: Install a 5000 watt regulated power supply, but the error size of this regulated power supply should not exceed 5%, preferably within 3%. Problems with the interface board, main board, and adapter board: If the interface board, the main board, and the adapter board are broken, the woodworking engraving machine does not move in one direction or three axes during the operation, forming a misplaced position. Problems with the spindle motor: If the stepper motor or the servo motor is not working, the whole machine does not move in a certain direction, and the screw is not turned by the hand.

Learn about engraving machine knowledge, what you should know

As a newcomer to a stone engraving machine, in addition to some necessary theoretical assessment knowledge, there are some things to be aware of when learning how to operate. For the sake of reference, we will give you a brief explanation today.
1. Theoretical basis: The training work must start from the theoretical training work, and the operators must conduct practical operation training under the condition that the theoretical assessment is passed. If the theoretical training is not passed, it is absolutely impossible to conduct operational training.
2, the use of engraving machine tools: After the theoretical training, the tool training must be carried out. Operators must be aware of common tools, engraving motor speeds, travel speeds, precautions, etc. Operators must be familiar with the application of the tool.
3, the scope of application of the material: operators must be familiar with the application range of various materials, familiar with different materials, different thicknesses, different finished products and so on. Familiar with different engraving methods for different materials.
4. Operation of various software of engraving machine: After the above training, software training can be carried out. The training of the software is mainly concentrated in the field of user application; the aspects that are not required by the user can be self-learned according to the training manual. The software requirements are: various types of software layout, various operations, path generation, and the ability to quickly find path errors.
5. Machine operation training: After the above various trainings, after the training personnel explained and the operator's understanding and assessment: the operator's operation safety and operation precautions are trained, and the trainees in the operation safety matters After the signature is approved, the operator can perform machine operation training.
6, the engraving machine operation of various precautions and training of engraving machine maintenance.